Instructions

Step 1

Peel the protective coating off all the panels including the base.

Step 2

Attach the cubes with the screws to the back panel and slot it into the base. For larger cases use a second person to hold the panel in place while the second is prepared.

Step 3

Slot the side panel into the base and screw in place with the back panel. Add the additional cubes to the side panel.

Step 4

Repeat step 3 with the opposite side panel.

Step 5

Slot the front panel in place and attach to the cubes using the screws.

Step 6

Place the top panel in place and screw into the cubes using the remaining screws.

Step 7

Remove case from base and place Lego set in place. Place case back onto base.